Tuesday, November 11, 2008

Arca Swiss Discovery

Arca Swiss Discovery 4x5

Friday, November 7, 2008

Hot swapping SATA drive utility for XP/Vista

Supported controller:

Silicon Image SATA Host Controller (SiI3112A, SiI3114, SiI3132, etc)
Silicon Image SATA-PATA (Parallel ATA) Bridge Controller (SiI3611)
SUNPLUS SATA-PATA Bridge Controller (SPIF3611)
SATA Host Controller (AHCI mode) (e.g. Intel Controller Hub (ICH), JMicron JMB363)

http://mysite.verizon.net/kaakoon/hotswap/index_enu.htm

Texas Instrument flashmedia controller driver for vista

The SD reader (TI PCI7411)on my Sony vaio bx546 does not recognize 4gb card in either xp or vista without a driver update, and sony only provided solution for xp but not vista. Fortunately someone found out the driver for HP nc8430 works on Sony:

http://www.notebookforums.com/thread170075.html

Widcomm (Toshiba) bluetooth stack on Vista

http://www.dev-hack.com/forum/viewtopic.php?t=1297

BIOS chip models

http://www.ioss.com.tw/web/English/RD1BIOSSavior/Select/RD1ModelSelectionGuide.htm

Getting PS2 keyboard to work

Need to borrow a USB keyboard.

In terminal:
cd /system/Library/Extensions/ApplePS2Controller.kext/Contents/PlugIns/

rename ApplePS2Mouse.kext and ApplePS2Trackpad.kext:
mv ApplePS2Mouse.kext ApplePS2Mouse.kext.bak
mv ApplePS2Trackpad.kext ApplePS2Trackpad.kext.bak

Leave ApplePS2Keyboard.kext alone.

Repair permission

cd /System/Library
sudo rm -rf Extensions.mkext Extensions.kextcache

reboot
Disable USB keyboard in BIOS.

Taruga sound patch

Taruga sound card driver patch:
1)apply taruga's ALC882 AppleHDA v0.4b.mkext (no sound yet)
2) patch ALC882M codec dump with AppleHDAPatcher v1.16.

To get ALC882 codec dump, boot with any Linux live CD (I used Ubuntu), in terminal type:
cd /proc/asound/card0
ls
Look for file start with codec#, mine is codec#2
cat codec#2
Copy screen output to a text file and save it on a USB drive. In OSX Drag and drop the saved txt file onto taruga's patcher.

Mac OSX on Thinkpad R61

INTEL CORE2DUO T9300
15.4 WSXGA+, CAMERA, BT
GMA X3100, GM965S-V, PCIE
1GB PC2-5300 667MHZ 1DIMM
ULTNAV(TRACPOINT TOUPAD) FPR
80GB HARDDISKDRIVE 5400RPM
DVD REC 8X MAX ULTRABAY
11ABGWIFI WL LAN
INTEGR.BLUETOOTH PAN

$777 plus tax

Componant manufacturer:
Ricoh MS/SD/xD reader 1180, 0592/0843/0852
Ricoh 1394 controller 1180, 0832
HDAUDIO modem
WLAN Atheros 168c, 1014
LAN BroadCom 14E4, 1693
PCMCIA Ricoh R/RL/5C476(II), 1180, 0476
Conexant HD Audio 14F1, 5045

Disc: Leo4All v2

Install: Plug in a USB mouse, internal mouse does not work during installation. To get bluetooth recognized, must enable bluetooth in Access Connection in Vista and then shutdown. No problem otherwise. Reboot into Leopard a success, working component: high speed USB, bluetooth, internal camera, firewire, SATA.

Enable WLAN: add 168c,1014 to Info.plist in AirPortAtheros.kext.
Enable Video QE CI: download Apple Graphics Update package and install.
Enable PCMCIA: use IOPCCardFamily.kext and IOPCIFamily.kext from Chun-Nan
Enable sound: use AppleAzaliaAudio.kext, speaker out only. Use bluetooth headset for private listening.

No solution yet:
Broadcom LAN
Conexant HD Audio (headphone, mic)
Touchpad: scrolling, tap-to-click
Built-in card reader

Emergency procedure:

F8
boot -s
/sbin/fsck -fy
/sbin/mount -uw /

Mac OSX 10.5.3 Leopard on PC

Mac OSX 10.5.3 with Netkas PC EFI v5.1

Abit AW9D Max w/ C2D E6400

Working:
Video: Nvidia 7900GS with NVkush
Audio: ALC882 with Taruga AppleHDA patcher v18
LAN: Dual Marvell 88E8056
Firewire
SiliconImage 3132 SATA
Microsoft wireless desktop 6000
High speed USB (USB2) with Orbyte EHCI driver
Bluetooth SYBA SD-U1BTC2-IS (Dial up networking, file transfer, stereo headset)
WLAN 802.11n Linksys WMP300n v1 (US version Broadcom 4329 chipset)
Sleep, shutdown and restart problem fixed by restoring AppleEFIRuntime.kext

Thursday, November 6, 2008

ATI Radeon softmod to FireGL

http://forums.cgsociety.org/showthread.php?f=23&t=227800&page=1&pp=15&highlight=softmod

http://forums.guru3d.com/showthread.php?t=199951

UPEK fingerprint reader software for Vista

Sony does not provide the buildin upek fingerprint reader support in vista for my vaio notebook. Software from ASUS works just as well, see:

http://forum.notebookreview.com/showthread.php?t=101461

ATI Radeon Mobility driver for Vista

ATI does not provide driver for their Radeon mobility products. They refer you to OEM maker website to find driver for your notebook video card. If you want to change the OS on your notebook, often you won't be able to find appropriate driver because notebook manufacturer is either too lazy or they just don't care about it. Fortunately some hackers have figured out a way to mod ATI catalyst driver for notebook use, works great on my radeon mobility x700.

http://www.driverheaven.net/modtool/

Windows XP Hotfix for SDHC support

http://thehotfixshare.net/board/index.php?automodule=downloads&showfile=3340

DD-WRT & Tomato WRT on Buffalo WHR-G54S

Factory firmware does not work quit well, network slows down significantly once someone starts torrent download, and connection is unstable while using encryption.

Flashed ddwrt firmware, succeeded with v23sp2 mini. Standard version always fail, luckily didn't brick the router. So far so good. The router seems able to dynamically adjust the output power depending on the activity.

Update: Network still isn't perfect, even after QoS was setup. With five people sharing, connection would randomly lost, need to reboot almost every day.

Loaded TomatoWRT, QoS function much better, and no odd disconnections, everyone happy now.

Grabbing video embeded in a webpage like YouTube

www.orbitdownloader.com

Works great! and it's free.

WEP crack success!!


OpenSUSE w/ aircrack-ng 0.9.3

Gitzo Arca adapter plate GS5160CDT


for new Gitzo square QR only, unfortunately not compatible with all arca style plate, for example, kirk plate doesn't fit.

Black and White reversal processing

http://home.snafu.de/jens.osbahr/photography/reversal_processing/osbahr_reversal.pdf

http://www.dr5.com

Rodinal recipe

Solution A
Water, 125F/52C 750 ml
p-Aminophenol Hydrochloride 100 g
Potassium Metabisulfite 300 g
Cold water to make 1L

Solution B
Cold Water 300 ml
Sodium Hydroxide 200 g
Cold water to make 1L

Mixing instructions: Add chemicals in specified sequence. Always use cold water when mixing sodium hydroxide due to risk of heat reaction. Unlike many other two part developers, you must mix both parts together to make the concentrated solution.

Allow Solution A to cool until a precipitate forms. Mix Solution A in an iced water bath at this stage, then slowly mix in Solution B while constantly stirring, first adding 280ml of solution B, and then adding the remainder until the solution suddenly turns dark. Follow this by adding the last drops of Solution B very slowly.

ASUS wl-500w as wireless repeater

Flash the router with DD-WRT v24rc7 mega version, instruction:
http://www.dd-wrt.com/wiki/index.php/Installation#Asus_WL500W

Repeater setup instruction:
http://www.dd-wrt.com/wiki/index.php/Universal_Wireless_Repeater

Web servers of Fortune 1000 company

http://www.port80software.com/surveys/top1000webservers/

Markins Q3 ballhead


Markins Q3 on Manfrotto 190cxpro3

Reception comparison (2)


Reception with my "super" antenna.

Reception comparison (1)


Reception with factory antenna come with the card.

My "Super" Antenna


Custom made wifi antenna with signal booster (not shown)

Account balance as of 9-29-08

Starting point


Account opened on 7-31-08, Traditional IRA

Cracking WEP protected wireless network

http://www.aircrack-ng.org/doku.php?id=simple_wep_crack
Installation notes on OpenSUSE 10.3:
#Wireless card Atheros AR2413 chipset
#install c/c++ and source pkg
#compile and install madwifi 0.9.4
During install if can not stop ath0 and get error:
FATAL: Module wlan_wep is in use.
FATAL: Module wlan_scan_sta is in use.
FATAL: Module wlan is in use
Do following:
sudo rmmod ath_pci
sudo rmmod ath_rate_sample
sudo rmmod wlan_scan_sta
sudo rmmod wlan_wep
sudo rmmod wlan
#madwifi driver patch r3386 does not work, use r2277
# if no client associated with target AP, type 1 attack will not wok (get 0 ARP requests), use fragmentation attack instead:
After fake auth step do:
aireplay-ng -5 -b -h
This will create the xor file for next step.
packetforge-ng -0 -a -h -k 255.255.255.255 -l 255.255.255.255 -y -w
arp-request
This creates an ARP request to be used with aireplay:
aireplay-ng -2 -r arp-request
#use kismet to get client list, c key
#use aircrack PTW to find key.

Kismet quick reference

http://wirelessdefence.org/Contents/kismetMain.htm

rt73 Aircrack-ng guide

rt73 linux driver for Hawking USB wireless network adapter
http://aircrack-ng.org/doku.php?id=rt73

Patch for 2.6.27 kernel:

Packet injection in Windows

http://tazforum.thetazzone.com/viewtopic.php?f=28&t=6811&st=0&sk=t&sd=a

Format USB drive to NTFS

http://www.ntfs.com/quest22.htm
FAT32 can not handle file size over 4GB

Choosing a radar detector

Radar detector test:
http://guysoflidar.com/august-2007/radar-detector-test.html

Stock trading related info

Day trade millionaire calculator:
http://www.mypivots.com/calculators/day-trader-millionaire-calculator.aspx

Broker review:
http://www.broker-reviews.us/sitemap.html

Converting Traditional IRA to Roth IRA
http://www.tdameritrade.com/forms/TDA266.pdf
No need to open a Roth account first then transfer the money to it from current traditional IRA. In section 2 after the roth conversion box write down current account number and it will be changed to roth. There is no fee for this conversion.Related IRS doc:
http://www.irs.gov/pub/irs-pdf/p590.pdf

Taxes on day trading
http://finance.comcast.net/personalfinance/view.html?x=tax/capital/daytrading

Commercial historical data
http://www.marketdataexpress.com/
http://www.cqgdatafactory.com/

Tuesday, November 4, 2008

485 lawsuit history and other immigration related stuff

PD 3/2005 TSC
I140(NIW) AP 4/2005
I485 RD 5/2005
FP 8/2005
PD current 10/2006
Lawsuit filed 10/18/2006
Summons issued 10/18/2006
Got AUSA receipt 10/21/2006
Summons all delivered according to USPS 10/23/2006
Got TSC receipt 10/25/2006
Got Attorney General receipt 10/26/2006
LUD,
5 emails(3 from CRIS, 2 from USCIS-CSSO). Msg says my I485 received 10/28/2006
Send in the return of (summon) service
and certified 10/31/2006
Got DHS receipt 11/1/2006
Called USCIS,
a rep gave a ref# and nothing else 12/1/2006
Called US Attorney's Office, they did send in an inquiry for me, haven't got anything back yet. They will respond before the deadline which is 12/19. 12/4/2006
Received 2nd FP notice, Scheduled on 12/21. 12/6/2006
AUSA requested 30 day extension. 12/7/2006
Went in early for FP. 12/9/2006
Judge granted extension, New deadline Jan 18, 2007. 12/12/2006
LUD no msg change, Emailed AUSA this morning about case status, no response yet. EAD expired today. 01/8/2007
LUD again, still no msg change. 01/9/2007
Agreed to another 30 days extension, AUSA filed the motion in court. 01/9/2007
AUSA proposed another extension, up to 60 days, He was informed by FBI councel that my name check is still pending. 1/13/2007
LUD no msg change,Called USCIS during the day, the lady basically knows nothing more than what online status says. 1/18/2007
LUD and Approved! Current Status: Approval notice sent.On January 19, 2007, we mailed you a notice that we have approved this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS. Please follow any instructions on the notice. If you move before you receive the notice, call customer service. 1/19/2007
LUD no msg change. 1/20/2007
LUD and Card mailed. 1/23/2007
LUD no msg change. 1/24/2007
Received approvel notice in the mail. 1/25/2007
Card received. 1/27/2007
Lawsuit terminated by voluntary dismissal. 2/4/2007
I129 case reopened due to former employer withdrew H1b, no big deal. 9/28/2008

Sunday, November 2, 2008

Ubuntu Bluetooth Dial Up Networking with Sprint

Ubuntu 8.04
Samsung Upstage

*Edit /etc/default/bluetooth:


# Change from 0 to 1.
DUND_ENABLED=1

*Edit /etc/bluetooth/rfcomm.conf:

rfcomm0 {
# Automatically bind the device at startup
bind yes;

# Bluetooth address of the device
device XX:XX:XX:XX:XX:XX;

# RFCOMM channel for the connection
channel 1;

# Description of the connection
comment “Name of the phone here”;
}

*Edit /etc/ppp/peers/ppp0:

/dev/rfcomm0
115200
connect "/usr/sbin/chat -v -f /etc/chatscripts/ppp0"
defaultroute
lcp-echo-failure 0
crtscts
usepeerdns
user ""
password ""

*Edit /etc/chatscripts/ppp0:

TIMEOUT 60
ABORT 'ERROR'
ABORT 'BUSY'
ABORT 'VOICE'
ABORT "NO CARRIER"
ABORT "NO DIALTONE"
ABORT "NO DIAL TONE"
ABORT "NO ANSWER"
SAY 'Starting Sprint...\n'
"" "ATZ"
OK 'ATE0V1'
'OK' 'AT+CSQ'
'OK' "ATDT#777"
CONNECT

*In terminal run command
sudo rfcomm bind 0 device-mac-address device-channel
pon ppp0

*In firefox, click file, uncheck work offline, tada! connected!

*To find device MAC and channel info, run command
sdptool search DUN

*When done with DUN, turn it off with command
poff ppp0